...the whole unit. also b4 replacing the charge corona unit check that the scorotron grid is clean and has no lint on it and that the corona wire is not slack. You need to replace the corona
grid/scorotron. I've cleaned and then replaced the corona unit in the past but black streaks still come back in the short term. I also cleaned the contacts on the back end of the drum modual. Oh! This
...c252 are not clear-primarily fuzzy in the upper right hand corner. Is it possible to clean the imaging unit? yes, u have 3 clean comb electrode, scorotron grid and corona channel of corona
scorotron grid. Take out the cartidge, dissasembly the scorotron taking off the screw, dissengage and clean the grid with one wet and soft towell. taking extremely care to not break the wire it is too
...scorotron grid, -425V +/- 21V (the two terminals identified as G are the same output). • Registration chute bias, -490V +/- 25V (the two terminals identified as CB are the same output). • Developer ...
Scorotron Grid? A scorotron (from screen controlled corona[1]), also called a corona grid,[2] is a device which creates corona discharge current, used in xerography. Scorotrons appear in photocopiers,
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions