Call service 6000:0098269 Our printer just stop and appear this code call service 6000:0098269, is anyone there can translate it? Thank you, [email protected] 6000 Broken fuser heater lamp wire ...
Question about FS-1118MFP Laser Printer
...scanner Lamp on Kyocera FS-1118MFP Unit poers up without error, but any scan or copy generates 3200 error and Lamp doesn't light up at any stage. this error belogs to Exposure lamp problem ? cause of ...
my kyocera photocopying machine is asking me to callservice 6000 what can i do/ what does it mean? 6000 simply means Broken fuser heater lamp wire The temperature does not reach 100°C/212°F ...
hi have an error call service 6000:0085594 My printer is Kyocera Fs-2000D If you can help me pls Code: 6000 Contents: Broken fuser heater lamp wire 30 ppm model: The temperature does not rise 1×C
...scanner unit (pin photo sensor) error Call service 5100 short-circuited main charger output Call service 6000 broken fuser heater lamp M wire Call service 6020 abnormally high fuser thermistor M ...
...Hi It is either cable connection problem. Unplug and plug it back all the cable connections. Or the scanner driver might be corrupted, try to uninstall and re add again the scanner driver in the ...
error c3200 It means the exposure lamp is not turned on. Either a connector has come loose or the exposure lamp and/or the inverter pwb and/or the control pwb must be replaced
erreur c3100 error c3100 is a scanner problem, try cleaning and lightly oiling scanner rails, if this does not help may be scanner motor or pcb. also check if scanner shipping lock is pushed on
kyocera fs-1116MFP lamp scanner error my dear you chek exp lamp
Question about FS-9130DN Laser Printer
what can i do for error code 5300 on kyocera 9130 printer Broken cleaning lamp wire While the cleaning lamp is on, the broken cleaning lamp wire detection signal is detected for 2 s continuously. Id ...
Usually answered in minutes!
192 Questions
143 Questions
118 Questions
97 Questions
55 Questions