Questions & Answers for: Epson Perfection scanner lamp

on a white strip above the place where the lamp is in rest. When there is a spot on that white strip, the scanner wil use the retreived information for the whole scan, resulting in a line on your scan

...lamp assembly. Have had the scanner for three to four years. Any suggestions would be greatly appreciated. Thanks for your time. Julie Hi FYI, A lamp Circuit board and assembly would cost around 80% ...

...scanner and have noticed that on the bottom bed scan carrage ther are two lamp, but only the one nearest to the front of the machine appears to operate, do you know if both of these lamps come on or ...

...scanner warms up and scans. If I select film (35mm) and preview, the bulb goes out, does not warm up and attempts to scan. I reinstalled SW and updated driver, but no luck. There are two lamps with ...

scanner warming up taking too long or in loop How old is it? Sometimes the lamps need to be replaced or the drivers got corrupted or too many start up items in your Windows start up group preventing ...

...unplugged and reinstalled and still get the same result. it sounds like the scanner lamp is not coming on, the scanner shipping lock is still set, or the scanner unit is not coming to the home ...

when scanning, a thick black line vertical line appears along one side. This happens even when I copy something. Make sure the glass is perfectly clean. Leave the lid up and press the copy button to ...

...scanner won't initialize, the lamp won't light and the red flashing light comes on. The fix is rather simple though. Simply drill a small hole through the bottom of the case and place a small metal ...

...do I correct this? try uninstalling the drivers and then reinstalling them if it doesn't work you will need to replace the lamp in your scanner for information onthis go ...

v 300. Scanning transparencies. Worked well till now. Light in lid no longer comes on. Can it be repaired Yes, if you can find a replacement lamp. Try your electronic repair shop.