Questions & Answers for: Minolta scanner lamp

...lamp source fail." Any suggestions? Thx Replace the Scanner- Increasingly there items are 'No Repair. Though a check on the Minolta support may be a help, Contact Avision in Newark California, the ...

...c04 problem Scanner lamp is not working no cods? can you take lamp out ? check with aom meter .sould have coninuity hope that help try also to check the thermal fuse of the exposure lamp(scanner

lamp. Dose the scanner find HP & does the scanning lamp turn "ON" it could also be the Lens HP. Was this code before or after you were there? If it was showing upafter you.. it could be that the Black

...lamp is on to long. Check the scanner itself that it moves any loose connections or binding?, Mite have a problem with the scanner circuit board? Second reset is behind machine, remove back cover, ...

...you need to check the lamp and the scanner cable for the lamp if this dose not resolve your issue check the main charge on the drum check the corona wires are intact The above will resolve your ...

...persisit change the scanner motor or PWBJ.Move the scanner manually,turn ON the power switch,if the scanner exposure lamp move,working the scanner motor is OK.Check the scanner home position

...the exposure lamp terminal connector,unplug the thermal fuse connector.Remove the scanner from the copier.Verify the continuity of the exposure lamp and thermal fuser.If is defective

...scanner lamp board that control the bright light under the big glass. the board that feeds that located under the scanner and control board in the back, recommended you get a qualified KonicaMinolta ...

how to remove c06F6 after doing one copy the exposure lamp stop and appear the code C06F6 Replace the lamp or the circuit board that controls the lamp also check the scanner cables and sensors

...of Minolta 4000 after doing one copy then the exposure lamp on its origin position and appear the said code Scanner issue have the scanner looked at mite have a bad cable or exposure lamp circuit ...