Questions & Answers for: Canon scanner lamp

...lamp problem. when acquiring from scanner it does not complete and gives reasons as bulb heating or object out of place etc. I checked scanner in control panel and it passes tests. I have removed all ...

I have a canon dr-1210c scanner. The menu display "lamp error." How can I fix it? The lamp is getting too hot. Turn off your scanner when not in use.

...scanner. when starts the lamp is flashing aand the scanner make a noise like "crcrcrcrcrcrrrrrrr..." can yoy help me to fix the problem thank you sell it to me ... ...

...add funtion) adjust/replace cleaning bladereplace scanner lampTry this when zed black copy came outcheck scanner lamp is workingcheck developing unit connection and contactscheck drum earthing ...

...scanner lamp and exposure glass (you have to reassembled it). If you can print then your USB port is ok(usb cable works), look for scanner software. Sometimes interface cable of the scanner lamp is ...

Scan is black If the scanner light does not move or does not light up then the problem could be a broken belt drive ob the scanner lamp or the scanner lamp is faulty.

...scanner lamp (cis lamp),you must unzip the scanner,is simple you undo 4 screws under the panel above the scanner and then another 4 and so reach the lamp.E225 error means you need to replace the ...

...scanner lamp.Unzip the scanner and change the scanner lamp.If a have been useful please give me a vote :).Thanks E225 means you need to replace the scanner lamp.Unzip the scanner and change the ...

Lamp shuts down during warm up cycle! Scanner works fine in normal mode but when in transparency mode the lamp turns of after about 7% through tha warm up cycle and then stops. I have reinstalled ...

...scanner lamp is warming up, please wait." Is it time to get a whole new printer or can you help me make this one last a little bit longer? It sounds very much as if the scanner is faulty/failed. The ...