Questions & Answers for: Saunacore sauna heater

KW9B model, power to unit but no heat when timer KW9B model, there's power to the unit but no heat when timer is turned on Heaters are pretty simple: when timer is on, voltage is applied to the heater

I have a KW 7.5 Ultimate-it will run for 15 minutes and then shut off-and will not restart until the room cools down and the reset button is pushed-the room doesnt even get warm check the thermal ...

Pilot light is off and it doesn't heat up at all. Worked fine until today. try re lighting pilot if no check gas if ok replace pilot assembly or ignitor

Saunacore 44QRS, is a 120 vac unit. As soon as you turn the elements on it trips the circuit breaker. I've tried plugging into different outlets, even a dedicated 20 amp circuit. The unit is only ...

Sauncore Kw 6 Se heater not heating up Heater is getting power, but heating element not getting hot. possible temp sensor

What does error code 4 on a cedrus sauna mean? check recirculation pump then heater element then temp sensor

One of the heating elements doesn't work Has been working since 2006. One of the two elements recently stopped working. Is it burned out? Might be. Only putting a multimeter will confirm this. 1st ...

why is sauna heater tripping gfci breaker shorted element replace

Sauna Control by Saunacore is not working. No power light showing on panel. It appears that power connection to the panel has been lost. How do I correct this problem? check fuse inside power panel if