...In the Bios, make sure you have set the Sata mode to 'compatible' This is normal- The BIOS shows the IDE bus as the Primary and Secondary master -The SATA 1 bus is almost always the third
Sata as primary master device, leave your old IDE drive as secondary master and I reccomend you set the 3rd drive as slave to your CD/DVD drive.You may also like to clone the old IDE drive to the Sata
...system will try to boot off of your backup drive and you could think that it is not seeing your sata drive. If that is the problem you must go into the drive configuration and make the sata
...preinstalled etc as the primary. Cheers, Bob Use SATA drives only SATA and IDE do not mix I had a SATA drive and tried to put IDE in as slave stopped computer from booting. removed IDE back to ...
Sata HDD set in primary master in Bios My HDD,s cable is sata cable . Dos Bootable disk do not detect it. Because it is not primary master in Bios set up. I want set my HDD in primary master or slave ...
...a limited number of problems: 1. SATA drive is not connected to the primary port 2. SATA cable is faulty 3. SATA drive is faulty The most common solution is to move the cable to the primary/first ...
Question about Caviar 500GB Internal SATA Hard Drive
...primary and i want 2 ad a 500 sata wd how do i set the pin jumper for secondary on my new one and the factory 320 has no jumper at all thanks The SATA Drives do not need jumpers to set primary and ...
Question about Barracuda 80GB SATA 2MB HDD 80 GB SATA Hard Drive
...to IDE..my second drive is SATA drive which is 80GB and it is connected by pci sata card in my pci slot.how do i get my secondary drive became primary drive?..what should i do?... change their
...primary drive and tried the SATA drive on its own, connected direct to an internal SATA card port, but Windows still fails to see it, even though it has the same Windows XP Professional OS installed ...
...SATA dive as primary master . i have a dell precision 670 desktop pc , the problem i am facing is that i am unable to make the SATA drive as a primary master and boot from it , THE IDE port is ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions