Questions & Answers for: Seagate sata bios

Question about 80GB Barracuda 7200.9 SATA s - 8MB Cache (5-pack) 80 GB IDE Hard Drive

1 Answer

SATA RAID BIOS setup there appears a notice: ?The number of disks is not adequate to create a RAID!!!? What does this mean? I don?t have enough knowledge with SATA/RAID, Is my SATA disk corrupted? How

Ad

Question about Barracuda 7200.10 500 GB SATA Hard Drive

1 Answer

...BIOS is unable to show the SATA drives. But after a few restarts and Bios troubleshoots I am again able to gain access to the drive. Solution: I tried to update the BIOS with the latest version. The ...

Ad

Question about Barracuda 40 GB Hard Drive

1 Answer

hard disk not detected but Cd Rom drive detected reconnect data cable or sat cablew to harddisk Aslo reattch power cable to it. Then check in bios that if u have sata then sata must enabled in bios.

Question about Barracuda 7200.10 500 GB SATA Hard Drive

2 Answers

...BIOS by selecting SATA drive first and then saving this configuration but still no effect. Any Solution!!! Thanks in advance. Best Regards Shahzad Dear, You have to make IDE drive as slave. For this ...

Question about Barracuda 7200.10 320 GB SATA Hard Drive

2 Answers

...mobo not detecting SATA hard drive go to bios setup,thn go to advncd settings thn u have to change the settings for hdd from ide to sata mode I just changed the settings in the bios and it

Question about Barracuda 7200.10 500 GB SATA Hard Drive

1 Answer

...SATA controller is set to "NON RAID" mode in bios. You need to go into BIOS to change these settings, If you don't know how to do it Give me your motherboard details (model no makers name)and I'll ...

Question about BARRACUDA ES.2 - HARD DRIVE - 1TB INTERNAL - 3.5IN - SATA 3GB/S - 7200R 1 TB Parallel

1 Answer

...check connections. If its the only sata drive connected make sure it's plugged into sata #1 slot. Could be drive, motherboard or bios problem. Next step would be to update the bios. That might

Question about ST3750640AS-RK 750 GB SATA II Hard Drive

1 Answer

Bios is not recognising the HDD at all nor is windows. I am using a GA-MA78GM-US2H and I have tried it in all Sata Slots on the board 0 throught to 4. I have an IDE plugged into the board as this SATA

Question about Barracuda 80GB SATA 2MB HDD 80 GB SATA Hard Drive

1 Answer

...SATA) and brands, motherboard brands and types, and BIOS types and configurations, please download or acquire your motherboard and hard drive manufacturers' documentation prior to acquiring a hard ...

Question about 250GB Maxtor DiamondMax Plus 21 SATA II 300 Hard Disk Drive 8MB Cache 7200rpm STM3250310AS 250 GB SATA Hard Drive

1 Answer

I need driver for diamondmax 21 Clean win7 install does not find drive and says driver not installed Turn the computer off. Turn the computer on, and press <DEL> to enter BIOS SETUP. Ensure that

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Seagate Computer and Internet Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Seagate Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...