Questions & Answers for: sat light wont dish remote

...wont go threw the channels in guide mode you have to push left or right to go threw the channels Hey there, Cheri Torres with DISH Network Customer Service here. I came across your post recently and ...

...light up at the top of the rem, then enter the 3 digit tv code and then press pound. this will now programm that rem to your tv. be sure to press the SAT button to put back into SAT mode to operate ...

SAT button until all mode lights light up. Enter a number between 1 and 15 using the numeric keypad on the remote. Press the pound (#) button Once the SAT button blinks three times, press record. Note

...SAT button light up. The remote will control the TV but not the dish receiver. The other works fine on both TV's. bdmills04 Have you replaced the batteries in the remote that is not working. If ...

SAT until all buttons on top of the remote light up. 3. Let go and while SAT is blinking enter a number between 1-15 on the number pad and press # 4. Press record 3 times and see if the number changed

...else. Try switching the remote to VCR and emulate the codes as what the dish codes arw/ Pretty sure but just try promming one remote for every thpmg. My monet=y would be on the sat remote/ ...

...the sat button lights up when you press it? If you are using good batteries and the sat button won't light up each time it is pressed, then you will have to call Dish Network for a remote

...light other than the SAT button lights up, press and release the SAT button to put the remote back into satellite mode, then try the remote to see if it functions correctly. If none of the buttons ...

...and try the Sat button. If the Sat button will not light up pleasereaddress the remote, I will send the link to help with these steps. ...

...SAT button light up when you press any buttons at all? If you press SAT, can you operate the receiver?If neither of those work then the remote most likely needs to be replaced. If you would like to ...