...projector but after replacement is still say lamp replacement needed and the lamp does not come on, I have tried two different new lamps, any suggestion or do I need to take it for repair? I had this ...
...sanyo_plc_xt11_multimedia_projector/manual-4891 gosh. have you tried turning the contrast on? if you have just serviced the projector, chances are, its not the projector anymore but the connection to ...
Question about PLC-XP56 Multimedia Projector
...projector to an authorized Sanyo warranty repair depot, and have the thermistors replaced in your machine. Typically, there is a thermistor to monitor lamp temperature, and a thermistor to monitor ...
Question about LC-SD15 SVGA LCD Projector Multimedia Projector
...Sanyo, your problem now may be lamps what hrs do you have on the lamps? Marc Engineer Need a little more detail. But if the units are dead, I would look at the lamp door and verify the interlock is ...
thermal breaker but that should never trip unless the temperature gets so high as to risk damage.(You never want to give that thing a reason to kick out) Hed the exact same problem, after my projector
...thermal reset switch on my sanyo plc xu115? thanks the switch should reset itself after it has cooled off, but it is typically near the housing of the bulb to read the temperature accurately. Looks ...
Question about PLC-XW200LMP XGA Projector Projector Lamp
...thermal reset button ? Hi!You need to check the back side of the lamp housing on the inner side of the projector. you will find it sitting on the top. press the small button over the thermistor which ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions