Questions & Answers for: santa fe cd player

Santa Fe 2005, CD player stopped working , need to reset My Sante Fe had to be jumped when the battery died, and ever since, the cd player won't work. It only displays "CD3". No buttons respond, it ...

...Santa Fe. REMOVAL 1.Disconnect the negative (-) battery terminal. 2.Remove the ash tray and then remove the screws holding the center facia panel. 3.Remove the center facia panel and disconnect the ...

...santa fe so i can wire a pioneer cd player RADIO 12V - red + RADIO GROUND - black - RADIO SWITCH - yellow + RADIO ILLUMINATE - green/orange + LF SPEAKER + white - brown RF SPEAKER + yellow - black LR ...

cd player wnt play or eject cds itacts like it wants to play but keeps running and making clicking sounds radio works fine the cd player needs to be replaced

...Santa Fe, while playing the radio the speakers keep going on and off; but the cd player is fine. How would I gain access to replace the stereo? to access the stereo you need to remove the dash piece ...

...Fe CD Player monsoon am/fm stereo w/6 cd changer facing the engine when you open he hood they are on the front right hand side with a large black cover over them. There is also internal fuses on the ...

car cd player error code when i put in a cd it makes a clicking noise and will not accept the cd If the CD player in your 2007 Hyundai is the original, it is probably shot

I just bought a 2003 Sante Fe but when I turn the CD player on it says CD2 and won't do anything else. Radio works cd player is gone most likely

Santa Fe and the CD player say error and returns my CD. I keep inserting the CD but for some reason the player keep saying error and spitting it back out. Try a different CD? If you have an it did the

need a wire diagram to wire CD player in 04 santa Fe with out factory plug You can get all wiring diagrams, torque specs, electrical diagrams, controls etc. at www.reliable-store.com