Questions & Answers for: sansui air cable

Sansui TV's come from the factory set for CABLE. If this is a HDLCDVD320, you will have to go into the menu to change the signal type to AIR, then run the automatic search to program in your channels.

...sansui tvs273 tv. Need to switch it from over the air stations to cable, but the set has no menu button. Original remote lost. Universal remotes work for channels and volume, but not the menu button. ...

Change Sansui HDLCD-1909 from cable to antenna On a Sansui HDLCD-1909, how do you change from cable to antenna after you have done the initial setup as cable? change to on-air

...air or vice versa on most Sansui flat screen tv's including the SLED2280, go into the menu. Select "channel" on the screen. Press "enter" on the remote. Select "auto ch mem" on the screen. Press ...

...channels in memory whether it is air or cable Sounds like a main system control memory IC fault. Contact any service technician, or the authorized service center for Sansui. Gopakumar Gopalan ...

...how to find channels (air or cable)

If you don't have a manual, do a google search for terms
MANUAL, SANSUI, AND THE model OF YOUR tv

YOU MIGHT SET SOMETHING LIKE THIS;

inch Sansui TV to an antenna After you connect the antenna cable to the TV go into the setup mode and on the tuner line change it from cable to air. Then do an automatic channel search and you're done

...Sansui tv. I'm not on cable, but tried hooking it up to an antenna without any luck. What do I need to do to get the TV to work??? Make sure the TV can receive digital over the air signals (it should ...

...sansui via video jack cable and received all channels, just not in HD. Could this be the main board is defective that is attached to the over the air cable connection, part no. CAA6I18092(3IM-01F) ...

how to switch from cable to air on a sansui tvv You will need to buy a digital to analog converter box.