Questions & Answers for: samsung remote sensor working

...Samsung Split Heat/AC indoor unit does not detect the remote control. Worked ok for 4 years. Tried a new remote and still didn't work. I can turn the unit on and off from the unit but need to use the ...

...samsung remote control model # BN5900545A and I can not program it to the tv. I do not have the code or the users manual for the remote control, so I can't program any of the channels. Have you been ...

...remote that came with the tv. I have a Samsung 42" DLP HLR4266WX Chances are that the sensor has gone bad. If you know how to get to the circuit board that it is on, then changing the board would be ...

...Samsung Mh19ZA2-07, with the remote ARH-403, but the remote only works sometimes. Im close to the sensor, the remote have new batteries, etc.... Is possible to reset the remote with the air ...

...REMOTE. I'VE CHANGED THE BATTERIES AND HAVE TRIED OTHER SAMSUNG REMOTES THAT WORK ON MY OTHER TVS. ANY SUGGESTIONS... Sounds like problem is with TV. Make sure the remote sensor on the TV is not ...

remote sensor in tv got bad and become unable to receive remote signals, replace remote sensor in tv. If other remote works then replace batteries in bad/ suspected remote and check. Let me know model

Samsung remote. TV1 works fine. TV2 works fine BUT when TV@ remote switches TV2 on it also switches TV! off! How can I make the reomotes work only with the TV it is associated with? Thanks Dave Hi, To

samsung ua46c8000 tv ir/sensor dose not work Good day! Please follow this procedure to find the exact problem. Check the battery of the remote.If your battery is 1.5vdc x2,the reading should be 1.5vdc

Samsung Model No.LN-T4061F, that when using my remote control, to turn it on will not fire up. I Have tried various remote with out no luck. I went as far as ordering a replacement remote from Amazon;

...Samsung remote is not repairable. Multiple Spectrum remotes only will work the volume, on/off and not the channels. Is it the main board? The Spectrum remote controls are not functionally ...