printer noise on start up/ warming up it sounds like gears are grinding not catching or something.. aftter the intial warmup it works great no printing problems... sound is loud and annoying check ...
Samsung ML 2010 Hey folks; The grinding noise is coming from the cartridge. It is jammed up and the gears won't turn without a fight. Time to replace the cart. I am going to try to repair this one if ...
GRINDING NOISE or PAPER JAM My Samsung SCX-4521F is making a terrible grinding noise everytime I power it up or run a print/copy through it (It still print/copies but with a lot of noise). If I pull ...
Samsung CLP300 cover pops open while printing After sending a job to print, the printer starts making loud grinding noises as though a gear is slipping. After a few seconds the right side of the front
Question about CLP 300 Laser Printer
...Samsung clp 300 printer. When I first turn it on it makes a grinding noise. Then after a few seconds it stops. When I print something it makes the grinding noise again and then stops when the page is ...
...printer to print at all.. The lock is a slide switch next to the large glass when you open the top cover, when it is locked the scanner can't move and makes a grinding noise. It's easy to bump into ...
...samsung clx-3160fn for 1+ years. Ran out of black toner last week, then when I changed the black toner it wouldn't print in black (but okay in colour). Then colour toners ran out, so replaced all ...
Question about CLX-3175FN Color Laser All-in-One Printer
...grinding noise and stopped printing, must replace transfer belt perhaps and where to buy transfer belt, prefferable in Holland. Are you sure that you have transfer belt problems? First check the ...
samsung clp 315 - it will print but makes a grinding noise, does anyone know what checks I can make? at the back of the fuser. there is agear you need to replace
Question about SCX 4521F All-In-One Laser Printer
printer. Listen the sound of initial motor run, (If smooth not grinding noise, check the toner cart OPC drum for jam. If yes check the fusser drive gear and fusser gear and assembly) If all are ok. 4-
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions