Questions & Answers for: samsung plasma tv main fuse

...Samsung plasma hpn5039, and i was watching tv and something started burning on the back, and the image went out. Does anybody know what that may be? Two things, 1st -- power board problem 2nd -- Y- ...

plasma hdtv will not power on--no blinking LED, simply no LED. Other objects plugged into same surge protector are fine; no evidence or suggestion of a power surge. The power supply board itself maybe

Samsung LN40A530P1F LCD TV keeps blowing main power fuse when i turn set on it blows right away i have replaced fuse many times. Also when back was off i noticed a arcing as fuse blows at a component ...

...fuse and/or triping the circuit breaker when plug in? Been working fine for 5 years until now That must be the mains cable or the filter box as it enters the TV. The TV is fused internally so suspect ...

...samsung 50" plasma tv, 12 amp, 250 volt? Hello Dyan, Hi you can find one at any electrical or electronics shop that sells spare parts, But mind you the reason why the fuse blows in the first ...

...plasma, both fuses keep blowing when tv powered This is a dead short, check power supply for diodes bad or zeners There is a faulty component on the power board, which is short circuiting. There is a ...

Samsung Plasma 64 inch, was on, then blew house fuses and no longer works. Isolated TV to work out that this was the problem. Any ideas Have had to keep it unplugged, as it will blow the power fuse, ...

...samsung un55d6400 led tv, where the standby light blinks 5 times, ive replaced the powerboard and main board. The fuse keeps blowing what is my next step The fuse keeps opening because the problem is ...

samsung tv un50eh5300f keeps blowing the fuse Hi Ben. see if this link helps you find out why. samsung tv un50eh5300f keeps blowing the fuse Google Search If the fuse blows instantly when you power on

...Samsung Plasma Display TV wont turn on. What causes this issues? I have a 50 Samsung Plasma Display TV Model PN50B450B1DXZA that wont turn on. I have replaced the Main board and the Y sustain board ...