Questions & Answers for: samsung dvd tray opening closing

samsung dvd-r135 Unit powers up,tray door doesn't open. I had a similar problem with a Liteon 5007,but a firmware upgrade fixed it. Is there a firmware upgrade for the Samsung dvd-r135? thanks The ...

...Samsung HT-BD2E blu-ray player so it'll be region free? Haven't tried it, but found this online somewhere.... 1. Open tray and remove any disks in tray. 2. Close tray. 3. Switch Off Player and Unplug ...

...Samsung DVD-1080P8 dvd player. How can i change it from only playing region 4 dvd's to play region 2 & 4? Thanks 1) Turn on the player with no disc in the tray 2) Press the Open/Close button to open ...

...samsung write master dvd player and when i press eject button the tray does not open.Only after i hit hard it will open. But closing the tray is no problem.everytime it happens.I think it is because ...

...DVD player 1) Turn on the player with no disc in the tray Wait till the unit is at the Samsung logo screen. 2) Open then close the tray, wait to see the No-Disc Message in the top Left Corner 3) Now ...

...NOT OPEN. HOW CAN I GET THE DVD OUT OF THE DISC TRAY? Look for the small hole in your dvd rom. This hole usually can fit a paper clip. Push and hold the paperclip inside the hole to open the dvd

Samsung HT TZ122 Home Theatre System to allow me to view DVDs from various regions 1: Turn DVD player on, with NO DVD in the tray. 2: Press Repeat on remote control (bottom right key) 3: Enter 76884 4

samsung dvd player model:p172/XTL, the problem is the tray keeps opening automatically, even if dvd is mounted and closed manually it just satays closed for 1sec and opens, without the dvd mounted the

...Samsung HT-H4500R 1) Turn on the player with no disc in the tray. 2) Open then close the tray, wait to see the No-Disc Message in the top Left Corner. 3) Now press the REPEAT button on the remote, ...

open/Close disc tray, would not open Does the Open/Close tray has anything to do with the Set Up of the unit, Clock set, etc, or should it open and close when button is pushed? Hi, your unit might ...