Questions & Answers for: samsung dryer cooling phase

...UK NZ suppliers as well as local Indian ones, as those countries are also nominal 240v single phase home suplies and they may have (1) the dryer, or (2)the transformer to suit the 110 2 phase ...

...dryer wont heat up...initially i think the problem was that it wasnt stopping during the cool down phase, meaning, unless i physically opened the door or shut it off, it would keep running. Now it is ...

...Dryer Samsung- and I jsut have transformator with 2 separate 110 volt that together are giving the 218 volt. this is strng one for 5 8 00 watts. only the problemI hvae now is that I am having this ...

...phase is connected where it shouldn't be!!!! Sorry it is a new Elec dryer... we just replaced an older washer dryer set. I wired the L1, L2 and neutral as per instructions and it was the same as old ...

dosn't dry dryer in cool-down phase of the cycle. how do I get it off cool down check the vent pipe it make be blocked

...dryer and in this case should have to generate familiy code E60 (or any of exactly fault code E61,62,63,64,65,66,67) if blowing cold air, as you explain. Means something is wrong with heating phase ...

Samsung Dryer Issue There are absolutely no error codes displayed. I just moved into my new (to me) house, at the old place there was a 4 wire plug (dryer worked perfectly for 3+ years at that house).

phase requirements with that dryer. Most of the dryers have a 120volt motor which is why you need two hots and a neutral. To complicate matters, recent changes to the code now require 4 wires on newly

...dryer Labor Day 2016. Ever since the first load, it has made a "bang" noise every 5 to 6-1/2 minutes, until the cool down phase. Any idea what could cause this? Thanks get a technician out under ...

...dryer does nothing during the cooling down phase as well, so I just wait for one-two hours) then it starts again, but again stops heating/cooling down/blowing air/tumbling. I thought it may be due to ...