SMASUNG DLP 50 HDTV LAMP WENT OUT, THEN CLICKING SOUND. REPLACE LAMP AND STILL BLACK SCREEN AND CLICKING SOUND The ballast that powers the lamp is bad
...DLP made a weird noise and the picture and sound went out. I replaced the lamp and there is still not picture or sound. What do you suggest. The color wheel will make a high pitched sound or even a ...
Ballast How can you definitively tell if the ballast that powers the lamp is bad? I replaced my lamp, then needed to replace the color wheel (which was shattered internally), and now there is a ...
...SAMSUNG DLP TV Model HLN437W Rear Projection Digital HD? If so I found a TROUBLESHOOTING GUIDE @ http://support-us.samsung.com/cyber/popup/pop_troubleshooting.jsp?ia_cd=02010300&model_name=HLN437W A ...
...samsung 46" dlp tv...so i bought a genuine phillips replacement lamp and replaced it...when i went to turn it on, all it made was a clicking noise...i looked into it and found that i might have a ...
...samsung DLP SP50L7HX it still shows the bulb being faulty on the colum but i know its brand new could it be the motor?? Hi,Sometimes its something simple.Did you close the door cover,it has a switch ...
Question about HLP4663W 46" Rear Projection HDTV
...DLP bulb and the picture worked for about ten minutes and then went blank. I can see the bulb is on on the back of TV but it isnt projecting image Hi,again,Thanks for the blessings.One quick way that ...
Question about HLP4663W 46" Rear Projection HDTV
samsung dlp acts as though the lamp is gone. Put samsung dlp acts as though the lamp is gone. Put new one in with same symptom. Lamp supplier thinks it's the ballast. Any ideas? It may be the ballast ...
Question about HLP4663W 46" Rear Projection HDTV
samsung HLP 4663w dlp-hdtv replaced lamp and ballast, still not working. lamp/standbytemp and timer all flashing. i get no clicking on ballast, upon power up all i hear is low fan or vibration sound ...
Question about HLP4663W 46" Rear Projection HDTV
Samsung HL-S5086W dlp television. Already changed the lamp, cleaned fans. have properly reset the lamp on the menu panel. I used the Mute 182 power combination. still going on and clicking off? I need
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions