Convergence Board Samsung Part Number: BP9500142E Samsung Part Number: BP95-00142E This convergence board works with the following Samsung television models: HCM4215W, HCN529WX, HCN559WX/XAA, PCN5425R
...board from the unit take note of the wires before removing them, - Im thinking convergance ic ยทย Samsung parts for convergance problem ...
...convergence board if it does. Thanks for your suggestions. Samsung must have changed the part number several times on this part, as I cannot cross reference the number that is currently installed. I ...
...samsung convergence /deflection board has the flyback transformer and convergence ic's mounted on it you change it as a unit and must realign your convergence after if you don't have the service ...
...Convergence Amp Boards Samsung HCN4727W blown convergence amp replaced (BP95-00142P). Worked for a few hours. Now tv is back to original problem, won't come on. Assuming new board has been blown as ...
...convergence circuit on a samsung HCL473W BEWARE some people suggest that the IC's can be replaced and that they are part of the convergence circuit, they are on the POWER board for the convergence ...
Question about HCL473W 47" Rear Projection Television
...amp boards. Here's a link to order the original Samsung covergence amp board for this model (HCN4226W) from a major parts distributor: Samsung HCN4226W Replacement Part Convergence Amp ...
Question about PCJ522R 52" Rear Projection Television
...or TV buttons Ur convergence is dead.Must change the convergence board.Buy the whole refurbish convergence at Tv repair world.com for the replacement.The Samsung/Akai use the same convergence
Question about HCM5525W 55" Rear Projection Television
...to buy a whole convergence board for the replacement,might still have it.The DLP tvs AKAI and Samsung tvs used the same convergence board.Or the shop,will cost u like 300-350 for parts and
Question about HCL4715W 47" Rear Projection Television
refurbish tv convergence board for the replacement.The DLP tvs brands names Samsung and Akai used the same tv convergence board.Or tries those tvs shops will cost u like $300-$350 for parts and labors
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions