Samson Servo 170 - 1 dodgy channel Sometimes when I switch my Samson amp on I only get sound out of one channel and have to turn the input volume up high in order to get the channel to come on. Once ...
Samson Servo 170 Amplifier Occasionally, when I switch my Samson amp on I only get sound out of one channel and have to boost the volume in order to get the channel to come on. Occasionally the same ...
Samson Servo 170 protection circuit problem! Hi the protection has kicked in on my servo 170, I believe a diode or 2 and a couple of resistors have blown which I can replace but I want to know if ...
Question about Servo 170 Amplifier
hi when i turn on my servo 170 my protection lite stays on and i get no sound One of the channels in the amp is bad. That channel will need tobe replaced. You may need to take it to a repair shop.
Can I use my amp with PA speakers? can I use my samson servo170 amp with PA speakers Yes, but stay within the "ohms" limit of the amp.(probably 4 ohm or greater) Paul
...servo 170 on the protection light cums on so does the left channel clip light Disconnect your speakers and see if the same thing happens. If it does not, then you have a problem with your speakers - ...
Sometimes when I switch my Samson amp on I only get sound out of one channel and have to turn the input volume up high in order to get the channel to come on. Once it's on it seems to be ok... ...
Samson servo 170 Hi there my amp has blown and had smoke come out of the vents ...what would have gone wrong, can it be fixed or should i just bin it?thanks for helping Hi, The
samson servo 170 circuit diagram It is in the service manual which you can download just look for it with Google.
One channel not working on servo 170 read the manual: http://www.samsontech.com/site_media/legacy_docs/servo_170_260_550_man.pdf If that does not work give us more details.
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions