Question about EFX 546i Elliptical Version 4
...safety switch on the console. Continue holding the INCLINE UP and SPEED DOWN keys until the display goes blank. INIT will appear in the time window of the display. The EEPROM is now clear and reset. ...
...safety, make all adjustments while the treadmill is OFF. 1. Make sure the treadmill is OFF and the running belt has completely stopped. 2. Locate the right belt adjustment bolt in the rear end cap of ...
Question about 9.1 Mode 1 Treadmill Repair Parts Eprom
...safety switch on the console. Continue holding the INCLINE UP and SPEED DOWN keys until the display goes blank. INIT will appear in the time window of the display. The EEPROM is now clear and reset. ...
...safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the ...
Question about 9.21 Treadmill
Belt won't move. It says to reset safety switch. Can't find the switch There is a red magnet or insert that it used as a safety key. If you lost it, you will need to buy another.
...reset safety switch message wont go away took it apart, every thing seems to be intact. help If you have checked the safety switch on your Precor 9.45 treadmill and everything seems to be intact, and ...
Usually answered in minutes!
191 Questions
96 Questions
39 Questions
34 Questions
36 Questions