Questions & Answers for: safety device

Ad device. Doubt if it's the t'stat. This sounds like something is overheating and the safety is shutting down the unit. The safety could be the fan delay/limit switch. Also, there are usually ...


Question about 110 (Gas) Kitchen Range

2 Answers device It will most likely be the thermostat that is faulty and will neeed replacing. If it wwas the safety device then you would not get any gas at all. Its 99.9% certain it is not the ...


Question about 110 (Gas) Kitchen Range

1 Answer device gets a bit of lint or dust in it over the warmer months when it is not in use then thatwill constrict the safety feature and make it thank it is low oxygen in the room. Blow out the ...

Question about PTID-4003TV Car Video Player

1 Answer device to prevent you watching the DVD when you are driving? This is done by connecting the safety device wire to the hand brake connection. thus preventing the device working until you apply ...

Question about Espire

2 Answers device on a babylock espire sewing machine without going back to a dealer? hi Katester. not sure if you have the manual but if you go to this link it has the manual and you can read up on it. ... device is probably tripped, it should reset automatically, also check other safety's for tripped condition, they look like small round device located in a variety locations through out the ...'s possible that the safety device on the machine is going out or there's another problem in the machine keeping the safety device from returning to normal the machine needs to be ... device on a pacesetter pc 8500 Can't sew because of the safety device being activated..motor not even running for this to happen. Um, I would take it for service. If the safety device has been ...

safety device been activated. baby lock elegant 2 while embroidering thread on bottom jammed, birds nest. took bobbin and shuttle out cleaned, changed thread. started and safety device activated and ...

...Safety device or the complete burner with device. The first link shows a complete set, the second only a safety device They are just for showing how they look like Kind regards, Dik ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3538 Answers


Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18630 Answers

Are you a Heating & Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides