Question about 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140
Chuck won't tighten Can't get the chuck to tighten The chuck is held onto the drive shaft via screw located inside the chuck. The screw has reverse threads and sometimes the screw gets loose ...
Question about 6408K 3/8" Variable Speed, Reversible Drill with Case
makita 6408 drill motor. can't see how to replace the chuck. i need to replace the chuck on my makita drill motor but can't see how to remove it. there doesn't appear to be a set screw on it and the ...
...rusted and the other turns a bit...You could use a good pair of vice grips to remove that stripped screw.if that will give you better access.. I haven't ever seen one jammed up like that though... ...
how to remove the chuck You will need 2 spanners ( the size vary's from differant models) and A screwdriver (generally phillips/star). Remove the screw that is inside the mouth of the chuck (it screws
Can't remove the chuck retaining screw. I can't remove the retaining screw on my Makita Model 6406 keyless chuck. I am trying to turn it clockwise, but the alan screw socket must be stripped.I did try
Question about 12 Volt Cordless Drill/Driver Kit
how do i remove the chuck from the Makita 12v 6227D There is a left handed screw down at the bottom of the chuck. I believe it is a flathead screw. You need to make sure you are in the lowest gear and
my router will no longer grip the bit you just need to replace the collet, should be able to find one online easy enough, oh, and make sure there isn't any rust inside the collet, that could make it ...
Question about 4 inch Angle Grinder (GA4030K)
new grinder cannot release lock nut to get blade on seem reaally tight is there somthing im missing i have trouble breaking makita parts loose. you will probably have to hit it. tap the bottom with a ...
I have a 6011d cordless Iam trying to remove the chuck appearantly someone has tried removing and the allen capscrew is damaged . Would anyone have a solution for removing the screw? You could try a ...
Question about Jigsaw Blade
how do I remove a makita shank blade as bolt wont move with allen key Maybe application of a suitable rust penetrator will persuade it to move.
Usually answered in minutes!
104 Questions
75 Questions
18 Questions