Questions & Answers for: running boards Microwave Ovens

Model 72180883400 Oven runs for few seconds then stops. F-9 failure code is shown on the display. Power cycling the unit did not help. You help is greately appreciated. Thanks. Hi, F-9 error code ...

microwave not working properly We have a Sears elite microwave and it will run for a time then stop with F9 showing. If you try to use it again it will run but it does not heat. We have tried ...

microwave F9 after a few seconds, so is it door latch,capacitor,magnetron?aft Hi 3 things can fail - the control board, the inverter board, or the magnetron. If the microwave runs for about 7 seconds ...

sharp r-610dk microwave runs but don't heat up sharp r-610dk microwave runs but don't heat up The magnetron has failed, or the inverter board, "if 7 years old or less" there is also a

my morphy richards p80d20p-yu microwave runs normal but won't heat food my morphy richards p80d20p-yu microwave runs normal but won't heat food The problem is caused by a bad magnetron, ...

turntable runs with door shut if it runs when the microwave is off the main board is still sending voltage to it. may have to replace board if that is the case

set clock but time goes off see this causes and fix it. God bless you Door Switch If the microwave runs for a few seconds and then shuts off, a door switch might have failed intermittently. Check each

sensor goes off inside microwave after 10 seconds see this causes and fix it. God bless youDoor Switch If the microwave runs for a few seconds and then shuts off, a door switch might have failed ...

panasonic genius1300w cuts off after 3 seconds see this causes and fix it. God bless youDoor Switch If the microwave runs for a few seconds and then shuts off, a door switch might have failed ...

why does my emerson microwave keep running after you close the door A fuse went out my house that day. And ever since then my microwave will keep running even after the door is closed Possible that ...