...rubber rollers inside your unit have become hard,,and they are slipping, and the unit detects this,, u can purchase a product called re-grip [ for rubber products and it treats the rubber in such a ...
Question about Playstation 3 (PS3) Console
...sticky on outside. See it you gcan retract it that way. You risk damaging the Disc eject system if you try to force the disc to eject by pressing the eject button more than 10 seconds. Once you get ...
...become 'sticky' and not springing back like it shoud do, sometimes its wont even move. My mum also had the same camera brought for her at the same time and now has the exact same fault. Is it ...
...sticky or you have to press very hard to activate? Open the remote remove one or two screws it should have, going around edge of remote with small screwdriver pry open, remove rubber number keypad ...
Question about Cyber-shot DSC-T90 Digital Camera
sticky and i have trouble opening it. Does anybody know how to take off this cover so i can clean under neath it? There will be few screws hiding under the small rubber pads remove the rubber pads and
...rubber "pinch" or pressure roller and a spinning metal spindle. Tape is routed between the roller and the spindle, and when the recorder is in RECORD or PLAY mode, the roller presses the tape against ...
...become sticky, or clogged. Have you spilled a soda, etc. on it recently? The best thing to fix this would be to aim a canister of compressed air directly in-between the lens fover and the lens, ...
...rubber wheels and other components that grab and move the tape along them. That should resolve the problem of the tapes being sticky and should record properly. I also suggest that you get some new ...
Question about STR-DA30ES Receiver
...rubber cube has decayed/shrunk (18 years). I added cut to size sticky foam pieces (from command strips) directly to the cube to prop-up this section of the Main Board with the bottom plate closed and ...
...rubber cube has decayed/shrunk (18 years).
I added cut to size sticky foam pieces (from command strips) directly to the cube to prop-up this section of the Main Board with the bottom plate ...
Usually answered in minutes!
217 Questions
156 Questions
152 Questions
73 Questions
53 Questions