Questions & Answers for: Aiwa rubber become sticky

...it is a mechanically problem in your player . You need to manually open to take out the cd . The rubber thread which should be connected to the motor inside the cd player might have moved from its ...

...laser reader angles up and clamps the CD, raising it above the main tray. This platform has four rubber bumpers, and I suspect they have shrunk, so the platform does not rise up high enough, or ...

...NOT FIX MY PROBLEM Try cleaing the rolers too. Thats what pinch the tapes. If that don't work the rubber belt that drives it maybe worn. The whole mechanism in a tape player is removable as a

rubber band came off if it is black and fairly long it's probably the drive belt and it has likely become stretched (or sticky).The belt fits on the inner circumference of the platter- to re-install -

...of 1/4" foam, that comes as a wrapper or protective sheet with many products bought on line, a rubber band that fits snugly in the outer groove on the head phone and have the rubber band secure ...

...the motor spindle by using your fingers to turn the round shaft which rotates freely. Remove the rubber mat off the platter. Place the belt around the outside of the drum on the bottom of the ...

my AIWA TV 19-inch color is 9 years old. It is my AIWA TV 19-inch color is 9 years old. It is blurry when I turn it on for about 25 seconds, then becomes clear. Also, the vertical side images are ...

rubber band which turns the turntable has slipped off. I cannot figure out the manner it is supposed to fit. Can I fix it myself? This the third time it's happened. Each repair cost me 90 dollars. Hi.

Are aiwa cassette belts available? Rubber drive belt required Belts are universal. You only need the size (diameter) in mm to find the right belt.

...rattling sound coming out of vibrating cone.Any advise is highly appreciated. Thanks RMV Refit the rubber, you can find itbon eBay, its called reconing actually in this case the cone is the