Questions & Answers for: roper washer quit working

Washer won't drain Roper AX6245 fills and agitates fine, but when it gets to the spin cycle, it just quits. There is no moter running or other sound. I tried all the washing cycles, but no luck. ...

My motor wont kick on at all if I move the drum around or tip it up to expose the bottom and mess with it, it will wok for a load but the the motor quites. It sounds totally fine when it does work, ...

...go to whrilpoolpartssurplus.com and call mark i have the lid switch on sale and can ship cheap I have a Roper Washer that the spin cycle quit working? Can hear motor & clicking sound, any

washer and it quit spinning. We took most of the wash out and restarted it. It worked OK for a day but then started leaking at the bottom. Checked the outside hoses and drain, OK. Check the water pump

Why doesn't my washer spin out more water. After spinning cycle clothes is quite wet. Could it be a loose belt? Their is no belt. The washer uses a double shafted motor which drives the pump on one ...

...quit just at the rinse cycle. One time use. Brand new timer. Now it won't even fill the washer at the beginning of any of the three programs. What??? Did I just waste $111.00 Verify that BOTH hoses ...

Roper washer model RAS8245EQ1 not working, buzzing noise The washer filled with water and quit working. Just makes a buzzing noise where the hot and cold water lines attach to the washer. Her you'll ...

roper washer model RAX6144EW agitator quit working first place to start is to check the brushes on the motor. These are carbon rods which settle on the centre of the motor and drive it using an ...

...roper washer. worked fine one day, the next wouldn't fill with water. got the manchine to spin, begins filling for wash with correct water temp setting (cold/cold) then quits. Move temp control to ...

my roper washer that filled with water and then stopped. loader the washer and it filled with water then quite working will not do anything at all most likely a bad lid switch