Questions & Answers for: roper dryer work setting

Roper Gas Dryer I have a Roper Dryer that has worked well for about 2 years. It has stopped heating on the automatic settings ( it will stills blows air and tumbles). It will heat on the timed ...

Roper Gas Dryer On my Roper Dryer, the heat won?t come all the time. At first it was in the automatic sensor dry setting and then went to all the settings. Today I tried it again and it works great ...

roper dryer and when I turnn the knob to any setting it makes a noise as if it is getting an overload of electricity. The heating element heats up but when I push the button for it to spin it will not

...ROPER GAS DRYER MODEL # RGL4632BQ2. KNOB ON THE TIMER DOES NOT PULL OUT, SO DRYER WILL NOT TURN-ON. The knob does not pull out on dryers. Turn the timer to the desired setting and push the start ...

...roper dryer just replaced the coil what else can it be first check the power coming to the dryer,is it 220v. next make sure the heat setting is on heat. if all good i would remove the back, disconect ...

dryer works but no heat 1.loose wiring---check terminals 2.defective thermostat---replace 3.defective centrifugal switch in motor---replace 4.defective timer---replace 5.open heater element--replace 6

roper gas dryer when on auto setting it heat for about 5 mins then blows cold air till you shut it off will not go off on its own and if you put it on the 30 min high heat it get hot for about 10 mins

roper gas dryer has no no heat. not really sure of dryer #. but this is the basic set up. Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes

...dryer so it will notify me when it is finished? Hard to say without model number. Most roper dryers have a small buzzer built in that automatically works without any settings. Others have a buzzed ...

...Roper dryer MOD: REX6634RQ1 SER: MT0610198 & my husband replaced the heating element (part #: 3403585) but now when I set the dryer in auto mode it moves too quickly & clothes are still wet. (Timed ...