suction loss on dyson animal wrote previously about suction loss, with no apparent plugging of hose/tubing areas, was asked about noise that accompanied problem... there is no noise except regular ...
no suction I cleaned and checked all hoses, sounds like something is stuck inside, like a sock, took machine apart as much as I could and couldn't find anything. Any suggestions? Ok first thing to do ...
Suction not working The suction in my vacuum as all my other vacuum has done in the past is not as strong as it was. As a matter of fact it's actually blowing out rather than picking up. I don't know ...
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
My dyson D17 is making an incredibly loud noise, like grinding, when the bottom brush rotates. Remove the bottom cover plate and rotate the brush by hand. Look for things that make noise like stones ...
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
...belt is good is the clutch bad have you turned on to see if the area where you put the belt on is rolling? if it is you probably need a new brushroll . check the edge of the brush roll and see if ...
Question about DC25 Animal Bagless Upright Vacuum
Where can i locate a anchor for a dc25 animal brush roll? I need to get the anchor that holds the brush roll in place. Not the side that has the bearing but the other side where the brush roll ...
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
rattling noise coming from upper compartment The vacuum is working, but there is a loud rattling sound coming from the upper chamber and I can't open it up to see what it might be. ( sounds ...
dc33 brush doesnt spin why? dc33 brush does spin why and how do ifix it there as everthing else works on vacuum cleaner It could be the belts or clutch. HI, it's Jim from Crucial Vacuum! If your Dyson
Question about DC25 All Floors Bagless Upright Vacuum
dyson dc25 changeover hose dislodged no suction how do I get it back in place Changeover hose popped off have no suction how do I get it back in place? Check belt,s and tensioners,sharpen blades on a ...
Question about DC25 All Floors Bagless Upright Vacuum
DC33 how do I take out the roller Bar what do I press to remove it The bottom plate must be removed, then pull the brush roll out from the belt going around it. If you are pulling the brush roll out ...
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
655 Questions
597 Questions