Questions & Answers for: roller tray 1 samsung printer

...guides. As with all laser printers, you will eventually need to replace the following: 1. On paper trays and bypass: pickup rollers and separation pads. 2. On printer: fuser unit and transfer

...roller at the back of the printer in the paper tray area) is embedded with paper dust as is very comon on these units. try getting some water or even better still some eucalyptus oil and clean the ...

...fuser.... I have replaced the toners but there is a problem. What and where I have to go in order to replace fuser, transfer roller and tray-1 pick roller no need to change it just wash ...

...roller - no avail. Someone has suggested downloading smartpanel for the printer from samsung website however have been unable to locate this, even using seach on their site....anyone know the link or ...

...to try then says paper jam at tray 1 if I keep resetting it will feed paper sometimes but still wont print clean the rubber roller that pulls the paper from the tray with alcohol not working

How do I replace the tray 1 pick roller for my samsung CLX 3160FN printer? Take out the tray, and you will find a pick rubber roller at the base. Even you may clean and use it.

...Pull the paper tray out and clean the rubber roller. 1 problem in my printer when i copied or scanned any picture or document it give output black line or black ground of paper. what is it solution

...tray 1) Be sure the paper tray is inserted all the way in. 2) Be sure you're using the right size of paper (width, length and thickness; paper that is too thick may jam a laser printer if it is not ...

...roller? Which one-the big one in the middle or the one closer to the front of the paper tray? Clean the one you can see above the paper tray with a cloth wetted with water or 409 or fantastic No ...

...tray and the roller simply slides off. Slide the new one on and you are sorted. The only problem is that the Replace Pick-roller message will not go away! There MUST be a way of resetting it, but ...