Questions & Answers for: Konica Minolta roller marks

...marks on printout My Konica minolta magicolor 2400w has a regular mark on the printout that has no color about 1 inch long 4mm wide. It looks a bit like the toner has been dragged off before fusing. ...

...solution is to take the fuser unit out of the printer, then you may be able to manually rotate the rollers to clear the jam. If there are any marks or scratches on the fuser rollers, you will need

...6500 I have a problem with marking on my bizhub 6500. The marking seems to be coming from a 2 roller configuration with an outer belt that has some sort of plastic film cover. This roller is ...

...the toner is broken. check the mirrors on toners.for marks on paper check pc drum , TBU and fusing rollers, if you fin same kind of mark there then you found youre faulty part. about he noise, cant ...

...and then the error light comes on and I cannot find anything wrong with it. its possible the feed rollers that pull the paper into the copier from the tray isn't picking up... you will see marks on ...

...on it, If the lines were imaged on the drum, replace drum unit. No marks on drum or paper yet, posible the fusing section roller is damaged and marking pages. Stop test will show where defect

printing with roller marks replace the rollers

...lines running like this - - down the page in line with the other dots. I have cleaned lasers, toner rollers and even used a laser cleaning sheet. No luck. Any thoughts? Here is a picture of a page I ...

why will paper will not feed feed rollers could be shot look or I kinda skid mark on the paper that's if its miss feeding more info please

...photos. Imaging& Toners are ok...Some Images are even dark. Thanks, Mark How about the transfer roller and transfer belt have they been replaced Transfer belt is the shine large belt and transfer ...