Questions & Answers for: Lexmark roller cleaner

...roller sound when I ask it to print- but it will not take in any paper!! Scanning is OK - but sometimes says there is no connection to the computer - but there is 'cos scan works & can be saved to ...

...a little bit of sandpaper to the separator pad. Just enough so that there is more friction. If there is no pad, clean the roller with a cleaner that doesn't have alcohol. That will dry out the

...roller. get spray dust cleaner at office max or staples, office depot, or big lots; spray the heck out of it to get all the dust out of the paper roller; also turn machine on and off several times. ...

...Roller Rejuvenator/Platen Cleaner". It's made by a company called Techspray. Part number 1612-2SQ. That should clean the roller and soften the rubber up a bit. The only way to prevent this is keeping ...

...roller cleaner or alchol. Also the type of media (paper) you are usings is a problem. You also mite want to check your operators manual you mite be only allowed so many sheets of media in the tray at ...

...with a lint free cloth soaked in a chemical based cleaner such as isopropyl to bring the 'grippiness' of the roller back. At the moment the paper dust is making the roller slip rather than

...roller with a little bit of white sprits or better if you have got some methylated spirit this will dry better. Agaood luck hope you can fix. Usai. Had same problem and couldn't find any info on how ...

...cleaner. After a few pages I have again the same problem. What can I do? this toner cartridge sounds like it needs replaced. but here are a couple of things to check. pull the toner out open both ...

...ROLLER or a worn SEPARATING PAD both made of rubber, you could try cleaning them with RUBBER CLEANER (you can use care wiper cleaner pads) both devices are located usually where the paper are fed in ...

also when I am printing the paper does not go through as the print job is in progress. dont open it, just spray with a contqact cleaner spray inside the paper feeder , you will see the pick up roller