Questions & Answers for: roller brush hoover vacuum working

Question about Ultra U6430-900 WindTunnel Bagged Upright Vacuum

Self propel not working, burning smell

...roller brush. Is it full of string and hair? If so, unscrew the four phillips-head screws holding the plate on that covers the roller brush; pull out the brush, and cut off/clean off all the hair and ...

Question about U5753-900 WindTunnel Bagless Upright Vacuum

1 Answer

My hoover windtunnel + cyclonic will not pick up

My hoover windtunnel + cyclonic will not pick up the dust where the brush is but the side distachment working fine check the belt of the brush roller. Or check for a clog

Question about U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

1 Answer

I ran the vacuum over throw rugs and the brush

...brush roller just stopped. I can't get the roller to work now... it won't even spin and the "brush" feature is in the ON position. You've got a broken belt. Most Hoover Vacuums have a spare ...

Question about U6630-900 WindTunnel Bagless Upright Vacuum

1 Answer

My Hoover Windtunnel Mach 6.9 brush roller quit working. Upon investigating I found that the idler arm pulley was broken so I managed to replace that. Before putting the cover back on I see the cont

...brush roller quit working. Upon investigating I found that the idler arm pulley was broken so I managed to replace that. Before putting the cover back on I see the control knob for the roller brush ...

Question about U5399-900 WindTunnel Lite Upright Vacuum

2 Answers

I'm getting no suction and the brushes are not rotating

...brush roller has stopped moving. General maintenance to your vacuum is crucial and will help it work at peak performance. First things first lets focus on the brush roller. Unplug the vacuum and turn ...

Question about U6630-900 WindTunnel Bagless Upright Vacuum

3 Answers

Brush won't spin on hoover wind tunnel bag less upright when on carpet, belts are fine

...brush roller. Lesser tension diminishes the brush roller's turn rate, speed and can lead to the brush roller not turning at all. The next thing to check would be the brush roller itself. Usually you ...

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

2 Answers

As I was vacuuming my vacuum cleaner stopped working

...roller brush that is not running properly. All these situations compromise the unit's air flow and make the unit work harder, making it to heat up. To avoid these situations and to keep your unit ...

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

My hoover elite UH72011 just started making a horrible loud noise. Still has good suction and brush roller is working.

noise. Still has good suction and brush roller is working. Cleaned all filters, made sure nothing was stuck around brush roller If the noise is coming from the motor area it could be your motor is bad

Question about Air Cordless Series 3.0 Bagless Upright Vacuum

1 Answer

When you turn it on the lights on the battery come on and the brush roller will turn but the suction motor will not turn on.

brush roller will turn but the suction motor will not turn on. I have cleaned the metal connectors between the dust cup and the unit and it is still not working. Can this be fixed? Hoover Air Cordless

Question about Air Cordless Series 3.0 Bagless Upright Vacuum

2 Answers

Shark hoover smoking all electrics and lights still work and roller brush also still works and no suction is it my motor

...roller brush also still works and no suction is it my motor My shark hoover started to smoke and all lights and roller brushes and electrics still work but no suction and the smoke was grey could it ...