Questions & Answers for: a rocker box

rocker box need step by step instructions on removing the rear rocker box on a 1999 soft-tail custom First off remove the spark plugs from both cylinders, this will make it easier to rotate the engine

...rocker box on a buell x1 lightning need the torque specs for the rocker box on a 2000 buell x1 lightnin check out badweatherbikers.com I am sure you will find what you are looking for there. Theres 3 ...

...engine until the front exhaust cam has the valve in it's closed position. Reinstall the rocker arm and shaft and torque the bolt to 25 foot pounds. Reassemble the upper and middle rocker box

...rocker box covers on. Now, you're at the rocker plate with the rocker arms in it. You can also see the tops of the valve springs. Look and see if there is anything that might be causing your noise. ...

...rocker box is leaking oil Simple fix. Take the fuel tank off and remove the four bolts that hold the rocker box covers on. If the rocker box is leaking there, simply put a new gasket in place, ...

rocker box on a 1979 XLH 1000 Ironhead Sportster are as follows. Cylinder base torque - 25-35 foot pounds. Cylinder head torque - 55 -65 foot pounds Rocker box torque - 14 -19 foot pounds If your bike

rocker box oil leak front left bolt leak oil from bottom of rocker box between head and rocker box Hi Anonymous, for more information about your question please visit the websites below. Good luck and

...rocker box tapping loud on a 2000 harley road king fuel injected Have you had any engine work or head work done? Installed bigger valves or roller rockers? If so, the rocker boxes need to be ...

...rocker box gasket lower rocker box gasket has to be replaced. engine is stock with stock pushrods. can I just dismantle the 3 rocker rings, replace the gaskets and put the rocker rings back on? or do ...

...rocker box torque specs and underneath rocker box torque specs i need to know the torque specs on 2010 harley davidson street glide rocker box covers and underneath the rocker boxs including rocker ...