Scooba. If the issue persists, please follow the steps below: With the tank removed, press the Power button and then the Clean button. If the robot tries to start a cleaning cycle, power off the robot
...I can't open handle to clean tank just fixed mine! push down on the place where tank slides into robot while pressing release. worked right away for ...
...scooba 5810 says check tank and won't do anything. I tried putting plain water and a pinch of salt but that didn't do anything. Any ideas? Fill the dirty water tank with hot water and giving the tank ...
robot near the charging port to try to restart the pump. If the pump is turning, but Scooba still does not put down solution: Check that the battery is installed correctly and that the yellow tabs are
...for it.send an email to ebay themselves.please leave feedback If the service light is on and the Scooba is beeping, the robot is trying to tell you what the problem is. Check your manual for a
...Scooba's pump, as described here, but use water instead of air to prime the pump. Water is more effective. You'll have a little puddle under the robot if you've been successful. Then rinse the tank ...
...I really love this thing and want it to work like it used to! I had this problem and contacted irobot. An important fact was left out of the early edition user manual to not leave the battery ...
Scooba model 6050. The robot picks up dirt as found in the screen, but does not vacuum up any water. The dirty water tank remains empty after using all of the clean water. Help. Thanks. the dirty ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions