Questions & Answers for: rinse hold flashing

...rinse hold light the machine starts for a few seconds then stops then the rinse hold and power light start to flash, can anyone help please??? Check your exit hose spigot, it may be clogged. This is ...

...Rinse Hold.. use this option to Help reduce creasing of delicate or synthetic fabrics by holding clothes in the final rinse water. The rinse hold light will flash to indicate that the programme is ...

...rinse hold. The manual says if mini load, rinse hold & pre-wash are flashing it's a filter/pump blockage but I'm not getting a flashing 'pre-wash' light just the others. Tried cleaning the filter ...

rinse hold/mini load lights flashing Aquarias 1400 - wash enhance/rinse hold/mini load lights flashing - have checked pump filter - looks ok - no blockage - any ideas ? You might have to take the pump

...rinse hold flash. press and hold on off button till the display panel lights up.Then press and hold the on/off button and the start /cancel button together.You will now reset the washing machine ...

...rinse & hold I am assuming you have the model EDW254C. Please clarify if the LED 1 (rinse & hold) is flashing. If not what is the status of the LEDs for other cycles - are they all off or on? ...

...rinse only light should be on.....not flashing.  Now press the start button first and hold; then press the cancel button.  That should cancel all lights.  Then press wash button then ...

...flashing fast and wont drain drum and finish wash Fairly old well used washing machine wont finish hot wash cycle rinses light flashes rapidly and it wont drain Try checking the filter for a blockage ...

...an er error code has come up with flashing: hold to lock, rinse aid, rinse only. I have tried flipping the breaker for 10 min then turning it back on. No change .. thoughts?? check heater ...

...rinse hold and on/off light flashing Hello all, when i start up the washing machine it start up, starts turning then stop washing. rinse hold and on/off light starts flashing and the machine start ...