Questions & Answers for: rinse hold

Ad

Question about First Edition FEW12 Front Load Washer

1 Answer

...Rinse Hold.. use this option to Help reduce creasing of delicate or synthetic fabrics by holding clothes in the final rinse water. The rinse hold light will flash to indicate that the programme is ...

Ad

Question about GU2400XTP Built-in Dishwasher

1 Answer

rinse aid every use, so assuming you filled the compartment , that will hold enough rinsing aid for 35-40 washes before needing to be refilled. is it possible taht you havnet waited long enough for it

Ad

...hold the Rinse Plus button and wait for the washer to start emitting a tone. Whilst you are pressing and holding the Rinse Plus button, the tone increases in volume from low to high and then it ...

Question about AWM6120 Front Load Washer

1 Answer

...thinks the wash is finished Make sure that you have not selected rinse hold or a delicate programme. This automatically stops the washer on the rinses full of water. Please rate my solution.

Question about LSB6200KQ Top Load Washer

1 Answer

Won't rinse. I'm not sure exactly what model I have, but it's a top loader and looks like this one. Anyway, It will start like normal but when it comes time to rinse the machine does nothing. There is

Question about LSB6200KQ Top Load Washer

1 Answer

...floor. This is what happened before I ran the cycle: I had mistakenly poured detergent into the "Rinse Aid" slot in the inner side of the dishwasher door. After one or two cycles, I realized the ...

Question about LSB6200KQ Top Load Washer

2 Answers

...button beside the start pause button selected as well? that is a rinse hold feature, if pressed, it will stop the machine at the last rinse for you to be able to add rinse aids/agents hope that ...

Question about LSB6200KQ Top Load Washer

1 Answer

...RINSE & HOLD program buttons, then turn unit on by pressing ON/OFF button. When program buttons are released, lights above them will flash. To end test program, press ON/OFF button.To check ...

Question about Fisher & Paykel Elba 3.7 cu ft Top-Load Washer - White

1 Answer

...is on then push start it will do it but on a full run it stops at rinse have u got a rinse hold switched on.this is to keep clothes from getting creases it holds until someone tells it to complete ...

Question about Fisher & Paykel Elba 3.7 cu ft Top-Load Washer - White

2 Answers

...time it stopped. The only other thing I can think of, is it has an automatic rinse hold function on the cycle you were using, or its had rinse hold set which hasn't been cancelled. I hope this

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Brad Brown

Level 3 Expert

18686 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...