Questions & Answers for: GMC ringing noise

howling noise/squeal i canged my rearend gears the othe day and now i got a weird noise , like a howling or squealing noise coming from that area. can u tell me why? sounds like your differential ...

rear end noise? 2002 yukon xl 2wd..while driving above 55 mph ive noticed a bearing type sound that does not change pitch when vehicle is turned either direction while driving,and gets louder the ...

noise in rear end 2001 gmc yukon xl while driving truck a clicking noise in in the rear end can be heard at about 45mph broken ring gear, defective U-joint, i would go with having the U-joints checked

grinding noise in front end and abs light came on i am having a grinding noise that speeds up as I accelerate and now my abs light has come on. Could this be the brakes or the front differential? ...

the differntial has to much back lash. clunking noise starting and stopping. Ring and Pinion may need replacing. Also check preload on the pinion bearings. Nut on end yoke may be loose. Sometimes the ...

having a problem with the rearend its making a humming noise when driving down the road it goes away when u push the gas and comes back when u take foot off and i already changed all the gears inside

I have a 2003 gmc Sierra half ton 4.8 liter that has a knock that sounds like lifters The noise sounds like lifters it is always there when it is running . Oil pressure is good. Is there anything else

Noise coming from front end and ABS/Stabilitrak errors A few days ago a banging noise started from my front end. It only does it when I first start driving, after a while it goes away. This morning it

...ringing buzz coming from the gas tank area. when the ignition is turned on and then when you shut the vehicle off the noise continues for a few seconds. Probably the fuel pump. If the noise is loud ...

loss of power and engine making rattling noise Run fault codes and look for failed knock sensors. I would suggest that the rattling noise is detonation from a lean fuel mixture-ignition timing or ...