Questions & Answers for: rim stud pattern

...rim selection? Take a steel rule of 6" or so and measure from the center of the wheel stud to the stud opposite of it. Since there are 5 in the circle, measure the distance between 1 and 3 and you ...

...long as bolt pattern rigth . measure bolt pattern .on 5 lug measure from one stud to the one across from it . maybe 5 inch or 5 1/4 bolt pattern. trucks wheels are differnt than car

...stud pattern look for a tractor salvage yard close to you..youre better off with an implement tire and wheel setup..or try to cut the wheel centers out of a 14 inch wheel and weld them into a taller ...

...6" wide The wreckers are a good place to start or have a talk with a tyre dealer and he will have the stud pattern listed for your car and will be able to advise if there is a 16" rim available to ...

on the side walls of the tyres. If you are talking rims then you have to check the number of studs and the stud pattern. An easy way to check is to talk with a tyre shop as they have the specs on hand

stud pattern for focus 108mm pcd for sentra 100 or114mm pcd so stud pattern different so no probably not as there are different makers involved. Even though they are both 14" wheels with 4 bolt holes,

...Rim for any vehicle You measure from the center of the Stud across diaganally to another stud and if that measure ment is 5 1/2 inches or 4 1/2 inches whatever the tape measure says then your ...

stud holes are ( measuring rim off set) if both wheels measure the same then they should fit go to a tire dealer and get the details of each rim to see if it can be done the major items to be aware of

...30 foot trailer the same bolt pattern as is used on the towing vehicle or 6 stud pattern with as large as possible pitch circle dia as would be allowed for the hub in use that you can get rims to ...

...rims fit on Mazda tribute only if the pitch circle diameter for the studs is the same and the off set is correct who makes the rims is immaterial it is the stud pattern and the off set that ...