ride height of the stud on the rail. Just had the same problem. The whole system went crazy, sometimes brake lights, some times hazards and turn signals. Turns out the wiring harness in the front turn
Service Stability light on means what? your truck is equipped with an air ride system the pump may be going bad or the sensor that controls the ride height may be on the fritz.
I need the torque specs for The front hub on a 1996 tahoe? mcdevito 75, I don"t have the exact specs. but 100 Ft. Lbs should be good, an auto parts store may have the exact specs. you can call them ...
ride height, a compressor kicks in (if the compressor is still working) and fills the air shocks up with air back to a normal ride height (it auto levels the vehicle). Once the weight is removed
...body already which helped tremendously. But after I changed the wires and plugs, it tends to ride very rough. Check your fuel pressure it should be 48-55 with key on engine off.If its not ...
if evertything tracks back to spring height issues. You may also have some cracked leaves in the rear springs as well. Have you checked the ride height and made those adjustments yet?
...ride control light What needs to be done It's probably one of he height control sensors on one of the struts not working properly. It will probably drive ok with the light on, but the auto ...
...ride system can be "self tested" with a GM Tech 2 scan tool, you need that done to see what is causing this problem, it could be the suspension height sensor, it could be a leaking air bag (very ...
...Tahoe rear suspension torque specifications Need torque specs for rear sway bar link, rear shocks and ride height sensors on rear upper control arms. A few good hits with the 1/2" impact should
Question about 2005 Tahoe
2005 Chevy Tahoe. Front suspension torque specs 2005 Tahoe please. https://www.355nation.net/threads/front-suspension-torque-specs.117041/ and ...
Usually answered in minutes!
904 Questions
942 Questions
867 Questions
830 Questions
647 Questions