Questions & Answers for: ricoh printer printing 1 copy

...copy of the printed dark text is printed about 1/2 way down the page. Anyone know what's causing this? We've lightened the density already.. the problem still occurs. Thanks Replace Drum or blade(if ...

Ricoh Aficio 250 When connected to a computer with windows 2000, I can not get it to print from the computer to copier and using LPT-1. It was working and now it shows error and when retry it still ...

...Ricoh Aficio 1018d copier but its not copying properly, half the words are missing its ghosting out towards the edge of the paper. It happens when using the feeder or placing it on the glass. Can ...

...Ricoh Aficio 2020 D; occasionally prints 8 1/2" X 11" fax as if sender laid on copy plate sideways. Upon contacting sender, not possible -- their fax machine is feed only, so it could't be sent ...

...Ricoh FT 4215 copier (laying unused for 1 year) Printed 40 copies or so and output mainly black with horizontal and vertical streaks. Reduced to lightest copy setting and white appears gray and still ...

...1/2 inch´s, why do this? is there any sensors on the adf unit, if so is the paper being feed into the adf unit, there might be a bad/defective sensor, try placing a letter size sheet on the ...

...ricoh aficio Fusing overheat error (center) 2 Symptom: The fusing temperature is over 250°C for 1 second (detected by the fusing temperature monitor circuit). Possible Cause: • Fusing thermistor ...

Ricoh Cl2000n is mass printing pages when we only tell it to print one page. It has done this from multiple computers, so this leads me to think that it IS the printer and not the computer, any ideas?

ricoh 3245c paper jamming in fuser any help please prints 1 copy then jams also double faint on top of print Check to see if;1. the exit sensor in working properly2. There is a piece of paper stuck ...

...as paper you have in copier. Try printing 8 1/2 by 11 document if doesn't print check printer preferences and adjust settings. Check copier paper trays make sure don't have special settings on ...