Questions & Answers for: ribbon cut Vacuums

Question about S3639 WindTunnel Bagged Canister Vacuum

1 Answer

MY CLEANER CUTS OFF LATELY MY UPRIGHT WINDTUNNEL HAS BEEN CUTTING OFF. AT FIRST IT WOULD CUT OFF, I WOULD TURN OFF THE SWITCH WAIT FOR A FEW MINUTES TURN IT BACK ON AND IT WOULD WORK UNTIL I WAS ...

Ad

Question about S3639 WindTunnel Bagged Canister Vacuum

1 Answer

why does my dyson dc04 work for about 5 mins then cut out the wire on my dyson 04 needs replacin but i cant get the casing off. My DC04 cuts out after abou 5 minutes use. I think there may be a ...

Ad

Question about S3639 WindTunnel Bagged Canister Vacuum

1 Answer

I was pressing a piece of ribbon on high with my rowenta iron and can't get the melted ribbon off the faceplate.Suggestions? Hi, Here is a tip that I wrote about how to clean the sole plate of your ...

Question about S3639 WindTunnel Bagged Canister Vacuum

1 Answer

...calculator. (It is very old.) The numbers printed on the tape are very faint. Do I need a new ribbon or something else? Is there such a thing as an ink roller for this model? I am not sure I ...

Question about S3639 WindTunnel Bagged Canister Vacuum

1 Answer

My Andis Easy Clip does not cut the hair very good any more. I greased/ sprayed the blade even bought a new blade but it only cuts for a couple of dogs and then just pulles the hair rather then cut it

Question about DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

1 Answer

DC15 Brushbar Problem. Intermittant operation of brushbar. Cuts out depending on angle of vacuum. Also cuts out on lifting from floor. Normal suction at all points and no blockage. Brushbar not jammed

I have a LG V-C7770CE bagless vacuum cleaner that cuts out after 10 minutes, let it cool down and it will start up again, all filters are clean and no blockages. works very well before it cuts out ...

my Dyson dc44 multi floor is cutting out it started cutting out when I was using it on max setting but now is cutting out on normal setting. It sounds like a battery level issue, as they automatically

Question about DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

1 Answer

Pro team 1500xp Beater bar only spins when vacuum is upright and cuts off when in vacuum position. While in vacuum position, if i push the Power Nozzle Lockout switch, brush cuts on, once i release ...

Question about DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

2 Answers

...cut the ribbon out If the ribbon is caught down the side and around the roller brush, you should be able to pull it out because ribbons are strong and won’t break. Otherwise, remove all screws from ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...