Questions & Answers for: APC ribbon cut

SMART UPS APC 3000 The APC Smart UPS 3000VA had dead batteries, and I replaced them with new ones. After replacing the batteries, I tested the unit with a 100W load (light bulb), and it switches to ...

apc ups 650va no power when connctd to ac/bt wd power in on batry my back ups cs(apc) 650 va has power if running on battery but when i plug it to an outlet power is cut off Check the relay Circuit. ...

ribbon cable was cut when inserting replacement batteries. New style ribbon cables do not have plugs on the end of them. They have to be pushed into the receiving strip thats soldered to a board. When

ups blinking continuosely I just change the batteries from my ups and now it have an intermittent blinking . The batteries are new but the ups is not charging ( I want to use the plugs when the ...

UPS swithed off as soon as the power cut occurs, but the battery is in good condition The first thing to check is to make sure you plug you PC to the backed up outlet on your UPS. As far as I remember

my inverter is not working i have the same problem!!! my uncle got this zebra ZUPS-512 from japan together with the iMac. When the power cuts off so the computer and the UPS keeps on beeping (meaning ...

Doesn't power on Hi I have this ups, when I try to power on, it doesn't start. I've checked the fuse and it seems to be ok. I've opened it and the fans doesn't ...

to remove metal cover by removing all screws around it. Once you remove front panel, you will see a ribbon cable attached to the board, probably is misconnected, if not, probably the problem is in the

My ups periodically cuts out and comes back as if a reset button is being pressed. The replace battery light is not on but I'm wondering if that's the problem or if the unit is just dying. could be a ...

I want to turn off the beeping sound on a apc ES550g battery backup system so it can be used for a sleep apnea machine. How/ I believe you will have to open it up and cut the speaker wire.