Questions & Answers for: Fuji FinePix ribbon cable

ribbon cable for the top switches has come loose.Undo the four screws holding the LCD screen (two are special--I used the corner of a small flat screwdiver), then gently prise the camera apart and try

...Ribbon cable for menu controls I am unable to change any setting on my camera or zoom. I open the camera only to find that the ribbon cable for the menu, zoom, delete, timer etc. is broken. Can any ...

Ribbon cable to main board broken or connector defective. If there is no power at all it is the connector from batteries to main board, this is also a ribbon cable. If the camera is less than one year

...ribbon cable for the buttons has either come out of its socket because it was not locked down (does happen) or it is broken and will need to be replaced. Fuji will not send out spare parts but will ...

...ribbon cable joins the two parts. The 2 halves can remain connected but opened out, outsides face down.The screen is revealed. If you gently lift the screen with a fingernail on the opposite side to ...

shuter button does not work on my s1000fd Does the zoom work? This all should be connected to the main board by a ribbon strip or cable. maybe it has come out of it's socket

...ribbon cable connecting the button-membrane to the main circuit board had been creased (folded too tightly on itself) although I have heard that the same problem can occur if it isn't properly seated ...

my fujifilm finepix a350 not working camera seems to work but screen is blank just a white light You need a new LCD with ribbon cable assembly. Available eBay for under US$20 including S&H.

ribbon cable. Is there a My problem is a broken ribbon cable. Is there a replacement? If so, where do i get either the ribbon or keypad and ribbon? Donor camera off ebay would be your cheapest option.

...it please can someone help me Unfortunately this is not a user repairable problem. Either you LCD screen is failing or the ribbon cable connection is not good. Both are not repairable by the