Questions & Answers for: Dell ribbon cable

...connecting the cd drives to the motherboard. Make sure the red stripe on the ribbon cable is on pin #1 of the plug. It could be loose on any of the three cable connections and cause that

...ribbon cable or find a replacement. you will have to order the required cable here http://www.globalsources.com/manufacturers/LCD-Computer-Monitor.html check out this link if this link do not help ...

Ribbon cable end broken The end of the ribbon cable that connect from the scanner to the circuit board has separated. Can this cable be reattached with a repair connector or are there replacement ...

...ribbon cable it was b4 you unhooked, check to make sure the power and ribbon cables are pushed in all the way on the hard drive and cd/dvd rom's, Check to see if the ribbon cable got pulled out from ...

...ribbon cable that slides out? What direction do I push/pull/slide the connector to get it free from the LCD so I can take the LCD out? Just the flat ribbon cable comes out of the connector. There are ...

...ribbon-cable between the motherboard and the drive is not fully-connected -- check both ends * the "data' ribbon-cable is wrongly-connected, i.e., "pin one" on the ribbon-cable is _NOT_ connected to ...

ribbon-cable has 3 connectors: one at each end, and one in the middle. Thus, with two ribbon-cables, you can support up to 4 "parallel-ATA" devices (ZIP drive, LS-120 drive, disk-drive, CD/DVD drive).

...ribbon cable is damaged or not connected properly. The ribbon cable is a flat piece of plastic with wires running through it that connects the keyboard to the laptop's motherboard. If one of the ...

...no longer a connection problem The ribbon cable may need the connected reattached to the motherboard. It could be possible this video ribbon cable is faulty and then this ribbon cable needs

which pin is number 1 in board? ribbon cable ribbon cables have a stripe down one side, this is pin 1