...cable for digital input from my nvidia fx5950 ultra but i get no signal , however if i use a dvi TO rgb cable i DO get a picture , the dvi end being plugged into the fx card. any idea how to fix the ...
...it woun't be pink because a "dead" pixel display's only one basic color, eather red,green or blue (RGB) and pink isn't one of them. So, in your case this could be a simple problem with that
Question about UltraSharp 2407WFP 24" LCD Monitor
Dell 2407 a04 Turns on (for 2 seconds) then off The problem is basically when I turn the monitor on, it powers up, the screen comes on perfectly (full resolution, brightness etc) for about 1-2 seconds
...the power is ok (tried it on a different PC) and the rest of cables are good, tried also the RGB/SVideo and the sane issue. Any idea? I have a dell ultrasharp and at first it would not come on ...
Question about UltraSharp 1704FPT 17" Flat Panel LCD Monitor
...seemed to help. What can I do? The monitor is broken. The circuits that generate green in the RGB setup are not working. If its under warranty, replace
Question about UltraSharp 2405FPW 24" Flat Panel LCD Monitor
New Monitor in my computer using a xp profesional I changed my old monitor for a flat monitor, when I installed was ok, just a little bright, but then I put the cd "adjusting Screen Resolution", after
Question about UltraSharp 1800FP 18.1" LCD Flat Panel Monitor
dell ultrasharp blinks on and off my dell ultrasharp 1800fp monitor keeps flashing on and off, its not a power problem as the power button stays on and when i disconnect the the monitor cable from my ...
Question about UltraSharp 2005FPW 20.1" LCD Monitor
RGB , S-Video , Composite video Digital Video Standard Digital Visual Interface (DVI) Audio OutputType None Input DeviceType None Expansion / ConnectivityInterfaces 1 x VGA - 15 pin HD D-Sub (HD-15) ,
Question about UltraSharp 1701FP 17" LCD Monitor
I have lost the original power supply for my dell 1701fp monitor. I have a power supply that I think may work as a substitute until I can replace the original. I need to know, what the acceptable ...
Dell 1907fp signal out of range error when starting up after shutdown The PC's video resolution is too high. http://www.fixya.com/support/r4873371-fixing_out_range_format_not_supported Basic LCD ...
Usually answered in minutes!
101 Questions
94 Questions
96 Questions
77 Questions
74 Questions