Questions & Answers for: rf modulator with lcd

...rf modulator ( very cheap) and connect your red yellow and white cables (rca cables from a dvd, game console etc) to the modulator then connect the modulator to your antenna with a coax cable. This ...

...other tv works perfectly doing this so not the cables or boxes but otherwise lcd is perfect. can the rf be adjusted on skyboxes as you would have done on vcrs? could this be it? CHANGE THE RF ...

how to play snes on samsung 46" lcd Connect the RF modulator to the cable input of your television and set the TV to either Ch. 3 or 4., depending on what channel the RF modulator is set to.

...an rf modulator. rf contains all video, audio, and sync signal. Video contains just video, no audio. If you use the yellow, and the white and the red you will have video and both audio

After the unit was dropped on the floor the RF feature no longer works. the RF module plugs into thr main board so it has probably popped out. Open the case and plug it back in again.

...on tv & cable box. Tv saids no signal. Check cable box works on other tv. Issue with RF Module Tuner signal fail to initiate on the Video modulator Check for diode rectifier and capacitor ...

...rf modulator or no. Quite the opposite - The Atari 2600 sends a modulated RF signal over the cable, it needs to go to the ANTENNA port of the TV, and you need an adapter. On eBay, look for ATARI 2600 ...

...it properly? I connected the antanae chord from RF to TV to ANT IN on my LCD monitor. The power indicator should light up steady even if you have made a connection mistake.Replace the

...RF Modulator. I get a skewded sideways picture. Does This DVDR compatable with a RF Modulator? Probably not. Better picture results are achieved with either S-Video, standard RCA AV cable ...

...rf modulator to aoc monitor I have connected my ps2 to an rf modulator from radioshack, so now I'm trying to figure out how to connect the modulator to the lcd monitor (tv=none)and where to put the ...