...the Svideo for the cable DVR and my DVD player. The only picture I am able to get is through the RF cable out of the dvr. Can I set up the Svideo input channel with the buttons on the front of the ...
The TV was working fine but when I hooked up the converter box, the TV now has a hazy picture and very poor audio. Any writing on the screen is shadowed. I have tried removing the converter box and ...
...I hooked up the converter box to the TV it came in hazy and poor audio quality. It had worked perfectly before the converter box. I removed the converter box and tried it with just the indoor ...
Why won't my tv pick up any cable channels? If you have the cable box connected through the coax or RF connection on TV. (from the wall to the input of the cable box and output of the cable box to the
...channel below 2 or press source/video switch on remote- if all else fails use an RF converter to use on channel 3 - Google "RF converter" to see what I mean input button on tv remote control also ...
...output, and the Red-right White- left audio outputs on the DVD. If you don't want to do this, get a RF modulator ~$15, and connect the yellow/red/white from the DVD output to the inputs on the ...
converter box says boot? what does boot mean on my converter box? Boot is another term for START. The box has a chip called a BIOS that is the initial start up sequence and authentication. It checks ...
what is rf jack on proscan tv The rf (radio frecuency) jack is the plug for connect the antenna
Question about PS27108 TV
...box try another one to see if the input you are using is bad. Also try feeding your set via the rf input on channel 3 or
Question about PS27108 TV
...converter box (ATSC to NTSC) to get most channels. Only low-power stations are still broadcasting the NTSC signals. Depending on the model, you can connect this to the RF port of the TV or the AV ...
Usually answered in minutes!
179 Questions
157 Questions
133 Questions
138 Questions
114 Questions