...rewind nor fwd work. Any hints? Is a motor out, or a gear out of alignment? Thanks, --Buddy When a VCR eats a tape, it can be cause by a couple things. 1. There is a rubber wheel called a "pincher ...
motor. The pincher wheel can become worn and/or dirty (slick) from the oxide coating off of the tape. You can try cleaning the pincher wheel and capstan with alcohol or try using a re-grip solution on
rewind tape or anything.Don't have user manual to see what that error means. E2 means: Loading motor locked in the unload direction. Usually(not always) happens with a going bad VCR tape on the rewind
motor during play, FF, rewind, and load but it does drive during eject. Does any of this make sense? . Mine did that, and when I opened it I found that a small drive belt (visible from the bottom
...motor locked in the unload direction. Usually(not always) happens with a going bad VCR tape on the rewind. Tape is becoming too difficult to rewind and/or VCR is getting tired. Eject tape. Discard ...
changes anything. Be careful: the tape now knows where end of tape is - do not fast wind/rewind to the end! The loading motor may have failed or a rubber belt has slipped off or is too loose or broken
Usually answered in minutes!
1,423 Questions
661 Questions
607 Questions
562 Questions
482 Questions