Questions & Answers for: Sears reverse osmosis

The door reverses back to open position instead of closing When I try to close the door either by wall the unit in the garage or the remote in the car. The door goes down about a foot passed the curve

I have a Genie IC250/A unit. Something is wrong I have a Genie IC250/A unit. Something is wrong with the controls, they are all reversed. If I cross the beam when the door is going up, it stops and ...

...on the sensors and did not find anything wrong If the main lights flash 10 times when the door reverses it is a door sensor problem. Make sure they are aligned and that the small light on each

...craftsmen belt drive opens but doesn't close properly. It will travel a foot to three feet and then reverse. If the door is disengaged, and in the up position, the belt will do the same thing. If the ...

The door goes part way down then reverses itself and goes back up and stops If when the door reverses the main light flashes 10 times you have a door sensor problem. Make sure they are pointed at one ...

...TO THE STOP (THIS ADJUSTMENT IS ONLY ABOUT 3/4 TURN FROM MIN. TO MAX.). THEN TRY THE DOOR IF IT REVERSES TURN IT ABOUT 1/16TH TURN CLOCKWISE. CONTINUE THIS VERY MINOR INCRAMENT ADJUSTMENT UNTIL ...

...the opener last year. Now even with the opener apart on the table, the motor won't go in the reverse direction. Do you mean 'up' reverse or 'down'

travelgoes3feet,automaticly-reverses-and-stops-com... travelgoes3feet,automaticly-reverses-and-stops-coming-back3feet. readjust the down pressure switch by turning it clockwise to put more pressure on

I have a reverse osmosis drinking water system. It started running really slow what can I do to correct this? Change filters. New filter.

...reversing when going down? This unit was installed in 2002. Suddenly when it's closing it may reverse when it's about 2 inched from the floor, sometimes it hits the floor and reverses and ...